On Banana Pi you can call:
$> gpio readall
This should give you an pinout like that:
+----------+-Rev2-+------+--------+------+-------+ | wiringPi | GPIO | Phys | Name | Mode | Value | +----------+------+------+--------+------+-------+ | 0 | 17 | 11 | GPIO 0 | OUT | High | | 1 | 18 | 12 | GPIO 1 | ALT0 | High | | 2 | 27 | 13 | GPIO 2 | ALT4 | Low | | 3 | 22 | 15 | GPIO 3 | ALT4 | Low | | 4 | 23 | 16 | GPIO 4 | OUT | High | | 5 | 24 | 18 | GPIO 5 | OUT | Low | | 6 | 25 | 22 | GPIO 6 | ALT4 | Low | | 7 | 4 | 7 | GPIO 7 | IN | Low | | 8 | 2 | 3 | SDA | ALT5 | Low | | 9 | 3 | 5 | SCL | ALT5 | Low | | 10 | 8 | 24 | CE0 | IN | Low | | 11 | 7 | 26 | CE1 | IN | Low | | 12 | 10 | 19 | MOSI | IN | Low | | 13 | 9 | 21 | MISO | IN | Low | | 14 | 11 | 23 | SCLK | IN | Low | | 15 | 14 | 8 | TxD | ALT0 | High | | 16 | 15 | 10 | RxD | ALT0 | High | | 17 | 28 | 3 | GPIO 8 | IN | Low | | 18 | 29 | 4 | GPIO 9 | IN | Low | | 19 | 30 | 5 | GPIO10 | OUT | High | | 20 | 31 | 6 | GPIO11 | IN | Low | +----------+------+------+--------+------+-------+
As you can see you also will see the current value of the pins.
If BCM (@see http://raspberrypi.stackexchange.com/questions/12966/what-is-the-difference-between-board-and-bcm-for-gpio-pin-numbering) is activated it should look like that (Banana Pi Pro):
+-----+-----+---------+------+---+--Banana Pro--+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | | | 3.3v | | | 1 || 2 | | | 5v | | | | 2 | 8 | SDA.1 | OUT | 0 | 3 || 4 | | | 5V | | | | 3 | 9 | SCL.1 | ALT5 | 1 | 5 || 6 | | | 0v | | | | 4 | 7 | GPIO. 7 | IN | 0 | 7 || 8 | 1 | IN | TxD | 15 | 14 | | | | 0v | | | 9 || 10 | 0 | IN | RxD | 16 | 15 | | 17 | 0 | GPIO. 0 | ALT4 | 0 | 11 || 12 | 0 | IN | GPIO. 1 | 1 | 18 | | 27 | 2 | GPIO. 2 | ALT4 | 0 | 13 || 14 | | | 0v | | | | 22 | 3 | GPIO. 3 | ALT4 | 0 | 15 || 16 | 0 | IN | GPIO. 4 | 4 | 23 | | | | 3.3v | | | 17 || 18 | 0 | IN | GPIO. 5 | 5 | 24 | | 10 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | | | 9 | 13 | MISO | IN | 0 | 21 || 22 | 0 | ALT4 | GPIO. 6 | 6 | 25 | | 11 | 14 | SCLK | IN | 0 | 23 || 24 | 0 | IN | CE0 | 10 | 8 | | | | 0v | | | 25 || 26 | 0 | IN | CE1 | 11 | 7 | | 0 | 30 | SDA.0 | ALT4 | 0 | 27 || 28 | 0 | ALT4 | SCL.0 | 31 | 1 | | 5 | 21 | GPIO.21 | IN | 0 | 29 || 30 | | | 0v | | | | 6 | 22 | GPIO.22 | ALT4 | 0 | 31 || 32 | 0 | ALT4 | GPIO.26 | 26 | 12 | | 13 | 23 | GPIO.23 | IN | 0 | 33 || 34 | | | 0v | | | | 19 | 24 | GPIO.24 | IN | 0 | 35 || 36 | 0 | IN | GPIO.27 | 27 | 16 | | 26 | 25 | GPIO.25 | IN | 0 | 37 || 38 | 0 | IN | GPIO.28 | 28 | 20 | | | | 0v | | | 39 || 40 | 0 | IN | GPIO.29 | 29 | 21 | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+--Banana Pro--+---+------+---------+-----+-----+